T-Cam Software Updates

T-Cam v1.72 (2021-10-20)

RELEASE NOTES

Added:

• Compatibility for ATEM 1 M/E Constellation HD
• Support for Avonic CM70 camera's

Fixes:

• Camera's not reacting after reboot of the camera with T-CAM still active

Download T-Cam v1.72

T-Cam v1.64 (2020-09-21)

RELEASE NOTES

Added:

• Compatibility for ATEM v8.4

Fixes:

• When camera is disconnected, arrows still worked but not the save and recall position

• When 2 microphones are on and you switch them both off at same time, wideshot would not trigger

Download T-Cam v1.64

 

T-Cam v1.57 (2019-12-16)

RELEASE NOTES

Added:

• Camera control over IP (as alternative to the standard serial connection)

Download T-Cam v1.57

 

T-Cam v1.49 (2019-09-03)

RELEASE NOTES

Fixes:

• Added automatic restore of the connection with Plixus after Plixus engine was switched off/on
• Fix for not receiving names

Download T-Cam v1.49

 

T-Cam v1.44 (2019-05-13)

Please note: the new Black Magic ATEM TV Studio TV HD driver 8.0 is recommended to avoid lockup when left on for a long time.

RELEASE NOTES

Fixes:

• Added compatibility for seats without delegate names in Plixus
• Fixed a memory leak when the system was left on for a long time
• Added automatic LAN connection restore after LAN interruption

Download T-Cam v1.44

T-Cam v1.39 (2019-02-01)

RELEASE NOTES

New Features:

• More logs in automation
• Delete logs older than 2 months
• New drop shadow setting to avoid performance issues for large layouts
• Button in the layout toolbar to show/hide microphone IDs

Changes:

• 'H' camera is now camera 8 when in "8 input" mode

Fixes:

• Switching between view A and B
• Mic events repeating, causing move between A and B
• When using more than 400 presets and going to cog, it would reset the number of preset to old number and wiping some presets
• Removed 200 seat limitation

Download T-Cam v1.39

T-Cam v1.26 (2018-03-07)

RELEASE NOTES

• Improved preview stability and picture quality
• To be used with the following drivers:
  • Blackmagic Desktop Video_Installer 10.9.7
  • Atem v7.2

• Changed overlay functionality: only one capture card needed (see user manual chapter 3.6)

	PC Screen 1	PC screen 2	ATEM output
Name Overlay off	Preview	Full view	Full view
Name Overlay on PC	Preview	Full view + adjustable Name Overlay	Full view
Name Overlay on ATEM	Preview with fixed name Overlay	No image	Full view with fixed name overlay

• Corrected error message after change of settings

Download T-Cam v1.26